MULTI-TASKER
9
[OFF12C6U3P]
[OFF34C7U3P]
[SW]
If "F" is included use the [OFFmCnUiPF]
command or the [OFFmCnUiFP]
command.
[OFF...F]: feedback
After processing a command, an OK or ER will be
returned as feedback if "F" is included at the end
of a command string or if the unit ID is zero.
Example:
[OFF1C2U3F]: if path is not set
[OFF1C2U3PF]: if path is set
7. [SW] – Switch
The switch command immediately connects
inputs and outputs, which were previously set
with the path command on this card and all other
cards in the MT100-100. The system will return
feedback as
OK.
8. […S]: save setting
This command saves the Output ON/OFF setting
to memory. The output will return to the saved
setting whenever power is turned on.
9. […F]: feedback
After processing a command, an OK or ER will be
returned as feedback at the end of a command
string or it the unit ID is zero.
10. […P]: set path
This command sets the path for the output, but it
is not activated until the switch command [SW] is
executed. Commands ending in "P" are not
executed immediately. The path for outputs on
multiple cards or the same card may be loaded
and then all switched simultaneously.
11. [WR]
This command groups multiple cards in the
MT100-100 Enclosure. Each unit contains a
maximum of nine groups.
Command Format: [WRCn…GkUi]
Cn = card ID No. (n = slot # from 1 to 19)
(1-8 for MT100-101 or 1-4 for MT100-106)
Gk = group number (k = # from 1-9)
Ui = unit number (i = # from 0-9)
Example:
To group card #1, 2, and 3 as group 5 of unit #1,
send the [WRC1C2C3G5U1] command. After
executing this command, card 1, 2, and 3 of
group 5 and unit 1 will be grouped together.
12. [CLR]
This command clears the members for a single
group or for all nine groups.
Command Format: [CLRGkUi]
Gk = group number (k = # from 1-9)
Ui = unit number (i = # from 0-9)
Example:
a) To clear group #1, send the [CLRG1U1]
command. This command clears the members for
the specified group only.
b) To clear all groups of unit 1, send the [CLR
G✻U1] command.
13. [G]
This command is used to request group data.
With the command, the user can identify which
input or output of a particular group is on.
Command Format: [GkUi]
Gk = group number (k = # from 1-9)
Ui = unit number (i = # from 0-9)
Example:
If group 1 has DA Cards with output 1 and 2 on,
while group 2 has SW Cards with input 2 on:
[G1]: will return feedback as [On12G1].
[G2]:
will return feedback as [On2G2].
14. [RD]
This command displays the members in each
group.
Command Format: [RDGkUi]
Gk = group number (k = # from 1-9)
Ui = unit number (i = # from 0-9)
(9 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais